Maintenance for 2001N, 2002N, and 1800R Manual

MOD30ML and Modcell Maintenance Manual
EVENT CODES AND TRANSITION MESSAGES
7.2. EVENT CODE DESCRIPTIONS
The diagnostic and informational event codes in Table 7-2 are related to block
types within the instrument database organization. Match the block type and code
to get the expanded description and corrective action. Informational events are not
acknowledged. The block types are identified as:
Type Description
AIN Built-in Analog Input PA Process Alarm Block
AOM Analog Output Module PAD Process Alarm Display Block
AOUT Built-in Analog Output PID PID Control Block
CJI Cold Junction Comp. Input Block PW Piecewise Table Block
CJIM Cold Junction Comp. Input Module RDIM Remote Digital Input Module
CL Configured List Block RDOM Remote Digital Output Module
DDOM Dual Digital Output Module RI Resistance Input Block
DI Digital Input Block RIM Resistance Input Module
DIF Display Interface Block RIO Remote I/O Interface Module
DIM Digital Input Module RTI RTD Input Block
DISP Display Block RTTI RTD Transmitter Input Block
DOM Digital Output Module SE System Event
EX Expression Block SM Supervisory Message Block
IC Input Communication Block Module SEQ Sequencer Block (DVC, LSEQ, SSEQ)
ICN Instrument Comm. Network
TI Thermocouple Input Block
IF Interface Block TIM Thermocouple Input Module
LN Linearization Block TM Timer Block
LP Loop Block TTI Thermocouple Trans. Input Block
ML Modbus List Block VCI Voltage/Current Input Block
MSC Modcell Serial Communication Module VCIM Voltage/Current Input Module
NM Notification Message Block WDOM Wide Digital Output Module
OC Output Communication Block WRIM Wide Resistance Input Module
7 -2