Maintenance for 2001N, 2002N, and 1800R Manual

MOD30ML and Modcell Maintenance
VIEWING DIAGNOSTIC DATA
Click on OK to complete the Port configuration.
Make sure these entries match the settings of the
instrument.
The default values for baud rate, data
bits and stop bits for various
communication equipment are shown in
Table 3.2.
10
Open the device by double-clicking on it and
select the serial port from the Port drop-down list.
See the next figure.
Figure 3.15. MicroMod ICN OPC Server
11
Leave other fields on this dialog box at their
default values. Click on OK.
The added device will be displayed in
the Device Tree on the left frame as
shown in the next figure:
3 -16