Maintenance for 2001N, 2002N, and 1800R Manual

MOD30ML and Modcell Maintenance
VIEWING DIAGNOSTIC DATA
Figure 3.5. Communications Setup Menu
Step
Procedure Comments
6
Leave the Log File entry at No; scrolling to Yes
will slow communication activities.
The Log File is used to capture Link or
Modbus communications to a disk file
(*.LOG). The file helps determine the
source of any communications
problems during configuration and
runtime activities.
7
Select the Database to Read field and if
necessary, scroll to select Current
This selection affects only attribute read
commands
8
Ignore the fields related to downloading. They do
not apply to diagnostics.
9
Select OK to activate the setup entries and return
to the Instrument Status display.
Read/write commands can now be
entered as described in Sections 3.2.3,
3.2.4, and 3.2.5.
3 -7