Maintenance for 2001N, 2002N, and 1800R Manual

MOD30ML and Modcell Maintenance Manual
HARDWARE, FIRMWARE AND SOFTWARE REVISION HISTORY
Table 9.1. Hardware and Firmware Revision History (Cont’d)
Instrument Rev Date Features Comments
MODCELL
Multiloop
1.0 July 1994 Batch control Requires Application Builder
software version 2.0
2004P
Batch/Advanced
Control
All Logic 4.0 & Regulatory 3.0
functions plus:
NOT SUPPORTED in 1706S
Identity Module
Sequence blocks Modbus download requires
2033N RS-232 or
Download via Modbus 2034N RS-485 (4-wire)
communications module
2.0 April 1995 Name changed to Advanced Control. Requires Application Builder
software version 3.0 or higher
All Batch 1.0 functions plus CS-31
Remote
Requires PC-30 ICN interface
S/W version 8.0 or higher
I/O support (replaces Batch and
Regulatory
identity modules)
2.1 January 1996 Corrects Potential Shutdown
Problems
2.2 March 1996 Fix problem with ICN lockup when used with older versions
2.3 Jan 1997 Incorporate new I/O code No effect on users or
compatibility
3.00 April 1997 Add Totalizer and Ramp/Soak block;
increase EX inputs; tunable PW
tables; deviation in PAD
Requires Application builder
2006S version 5.0 and PC-30
ICN interface version 9.0
Model C April 97 New flash EEPROM No effect on form, fit, function or
compatibility
3.01 October-97 Fix ICN anomalies (timeouts,
shutdowns etc.)
MODCELL
Multiloop
1.0 January 1992 Sequence of Events recording for up
to
Requires PC-30 ICN driver
version 8.0
2005P Sequence of
Events
29 digital inputs
Recorder Identity
Module
2.0 January 1995 Ext Modbus Comm and Omega
Clock Support
Model C April 97 New flash EEPROM No effect on form, fit, function or
compatibility
2.01 October-97 Fix ICN anomalies (timeouts,
shutdowns etc.)
MODCELL
Multiloop
Model A N/A Engineering development only Never released for sale/shipment
2031NZ RS-232
Module
Model B March 1993 Serial communications via Modbus Requires Logic v. 3 or
Regulatory v. 2 identity module
August 1994
DISCONTINUED
Replaced by 2033NZ RS-232
communications
MODCELL
Multiloop
Model A August 1994 Serial communications via Modbus; Replaces 2031NZ in new
systems; support for download
2033NZ RS-232
Module
Master or Slave via Modbus; isolated
Logic 4, Regulatory 3, Batch 1 &
above
Requires 2006S Application
Builder version 2.0 or higher
9 -4