Maintenance for 2001N, 2002N, and 1800R Manual

MOD30ML and Modcell Maintenance Manual
HARDWARE, FIRMWARE AND SOFTWARE REVISION HISTORY
Table 9.1. Hardware and Firmware Revision History (Cont’d)
Instrument Rev Date Features Comments
MODCELL
Multiloop
1.0 January 1992 Initial firmware release REQUIRES V. 5.2 FIRMWARE
FOR ICN CONTROLLER
2001P Logic
Identity Module
2.0 June 1992 RTD Input support IN LINK AND MINI-LINKS
3.0 March 1993 Supervisory, Notification, Expression
block
Requires version 6 ICN driver
1716S
enhancements; Modbus slave
communications
Requires version 5 Configuration
software 1706S
3.1 April 1994 Supports Modbus Master
communications
4.0 July 1994 Supports download via Modbus Requires v.2 Application Builder
2006S and 2033N RS-232
or 2034N RS-485 (4-wire)
communication module
5.0 September
1995
Supports Sequence Blocks and CS-
31 Remote I/O
Requires Application Builder
software version 3.0
5.1 January 1996 Corrects Potential Shutdown
Problems
5.2 March 1996 ICN lockup problem removed
5.3 Jan 1997 Incorporate new I/O code No effect on users or
compatibility
6.00 April 1997 Add Totalizer and Ramp/Soak block;
increase EX inputs; tunable PW
tables; deviation in PAD
Requires Application builder
2006S version 5.0 and PC-30
ICN interface version 9.0
Model C April 97 New flash EEPROM No effect on form, fit, function or
compatibility
6.01 October-97 Fix ICN anomalies (timeouts,
shutdowns etc.)
MODCELL
Multiloop
1.0 June 1992 PID, RTD support REQUIRES V. 5.2 FIRMWARE
FOR ICN CONTROLLER
2002P Regulatory
Control
IN LINK AND MINI-LINKS
Identity Module
2.0 March 1993 Supervisory, Notification, Expression
block
Requires version 6 ICN driver
1716S
enhancements; Modbus slave
communications
Requires 1706S Config. S/W
5.0 or 2006S Application
Builder version 1.5
2.1 April 1994 Supports Modbus Master
communications
3.0 July 1994 Supports download via Modbus and Requires v.2 Application Builder
2006S and 2033N RS-232
enhanced Modbus Master
communications
or 2034N RS-485 (4-wire)
communication module
November 1995
Discontiniued.
Functionality included in 2004AP
Adv. control Id. module
9 -3