Users Guide User Manual

IB-23C003
APPENDIX A - JUMPERS AND SWITCHES
APPENDIX A
JUMPERS AND SWITCHES
S-3002-134A
Figure A-1. Switch and Jumper Locations for 1731N Mini Link
Table A-1. Alphanumeric Listing of Jumpers and Switches for 1731N Mini Link
* Software and firmware support for these baud rates is currently unavailable.
Ref. Function Ref. Function
SW1 Mini Link ICN Device Address W11* Select 38400 Baud on External Serial Port
SW2 Base Address of Integral Serial Port W12* Select 76800 Baud on External Serial Port
SW3 Mini Link Reset Switch W13 Select ICN Baud Rate of 62500 bps
W1 Enable CTS on External Serial Port W14 Select ICN Baud Rate of 31250 bps
W2 Enable CTS on PC/AT Serial Port W15 Select IRQ3 for Integral Serial Port
W3* Select 76800 Baud on Integral Serial Port W16 Select IRQ4 for Integral Serial Port
W4* Select 38400 Baud on Integral Serial Port W17 Select IRQ5 for Integral Serial Port
W5 Select 19200 Baud on Integral Serial Port W18 Select IRQ6 for Integral Serial Port
W6 Select 9600 Baud on Integral Serial Port W19 Select IRQ7 for Integral Serial Port
W7 RESERVED W20 Select Interrupt Polarity Logic 1
W8 RESERVED W21 Select Interrupt Polarity Logic 0
W9 Select 9600 Baud on External Serial Port W22 Enable 5V Test Signal on 9-pin RS-232
W10 Select 19200 Baud on External Serial Port W23 De-Select Isolation Feature on ICN / PC
Interface
A-1