Users Guide User Manual

IB-23C003
INSTALLATION
SECTION 2
INSTALLATION
2.1 PREPARING THE PERSONAL COMPUTER
Prepare your PC/AT as follows:
1. Turn off the system unit.
2. Turn off all external options (printer, display, etc.).
3. Unplug the system unit power cord from the electrical outlet.
4. Unplug any external options from the electrical outlet.
5. Remove the system unit cover mounting screws.
6. Remove the system unit cover.
7. Use Table 2-1 as a worksheet to record the types of devices already installed in your
system unit. Keep this worksheet filed in a safe place for reference purposes when
troubleshooting.
NOTE
To determine the base address and/or Interrupts used by previously
installed devices you may have to refer to the device documentation.
Table 2-1. Personal Computer Device Inventory
Expansion Installed Device Base Address Interrupts
Slot
1 _______________ ___________ ______
2 _______________ ___________ ______
3 _______________ ___________ ______
4 _______________ ___________ ______
5 _______________ ___________ ______
6 _______________ ___________ ______
7 _______________ ___________ ______
8 _______________ ___________ ______
2-1