Operators Manual Owner manual

Micro-PWC OPERATOR’S MANUAL
Hierarchical Process Displays 47
same one used for the pop-up faceplate, or the pop-up faceplate, if different, has all the same capabilities
as the fixed faceplate built in. When a group is opened the operator has control access to all of the face-
plates within the group.
• To access control faceplates from control graphics click a control pushbutton.
• To access faceplate from a group information window click the tagname on the left side of the
window. Faceplates provide access to point displays for the tags that they control.
• To access a point display click the tagname button at the top of the faceplate.
4.5 Control Faceplates
Control faceplates provide access to control function within a module. The access can be used to manually
initiate process changes and to monitor the results of both automatic and manual control operations. Auto-
matic refers to operation being performed under controller execution. Manual refers to those actions initi-
ated after taking a function out of automatic control. Refer to the appropriate control system manual for
detailed descriptions of the associated control faceplates.