Installation and Setup Manual

Micro-PWC™ Installation & Setup Guide
Installation 21
4. Click on the Properties button on the Local Area Connection Properties window (Figure 3-5).
The Internet Protocol (TCP/IP) Properties window is displayed (Figure 3-6).
5. When installing the TCP/IP Protocols, configure the IP address and subnet mask as follows:
a. IP Address: If this PC is connected to a network, you must obtain the IP address from your
network administrator. If this PC is not connected to a network, it will not matter what IP
address is entered, as long as it is a number between 1 and 255.
b. Subnet Mask: Enter 255.0.0.0 as the subnet mask.
Figure 3-6. Internet Protocol (TCP/IP) Properties