Configuration Guide User Manual

Micro-PWC CONFIGURATION GUIDE
Grafx Editor 219
4.6 Micro-DCI SUBMODELS
Micro-DCI Submodels are submodels supplied by MicroMod Automation which provide the user with
access to the same submodels used to create point and group (Hierarchical) displays on the Micro-PWC
console. The filenames of submodels for use with controller modules are prefixed by the string uFP_. The
Module Type and (in some cases) the mode of the controller module to be displayed determine which sub-
model will be used in a Hierarchical display. Table 4-20 lists the top level submodels that are used in the
point and group displays.
Table 4-20. Micro-DCI Submodels for Controller Modules
MODULE TYPE INSTRUMENT MODE/FIX MODEL FOR POINT MODEL FOR GROUP
ANI SL6, MC5 --- uFP_pINai0 uFP_gINai0
ANO SL6, MC5 --- uFP_pINao0 uFP_gINai0
CON SL6, MC5 0 uFP_pINcn0 uFP_gINcn0
1 uFP_pINcn1 uFP_gINcn1
2 uFP_pINcn2 uFP_gINcn2
3 uFP_pINcn3 uFP_gINcn3
4 uFP_pINcn4 uFP_gINcn4
5 uFP_pINcn5 uFP_gINcn5
SU5 0 uFP_pSUcn0 uFP_gSUcn0
1 uFP_pSUcn1 uFP_gSUcn1
2 uFP_pSUcn2 uFP_gSUcn2
DI SL6, MC5 --- uFP_pINdi0 uFP_gINdi0
DO SL6, MC5 --- uFP_pINdo0 uFP_gINdo0
PAR MC5 --- uFP_pINpr0 uFP_gINpr0
SU5 --- uFP_pSUpr0 uFP_gSUpr0
PLC SU5 --- uFP_pSUpl0 uFP_gSUpl0
SDT MC5 --- uFP_pINsd0 uFP_gINsd0
SU5 --- uFP_pSUsd0 uFP_gSUsd0
TOT MC5 --- uFP_pINto0 uFP_gINto0
DK3 --- uFP_pDK3 uFP_gDK3
KM2 --- uFP_pKM2 uFP_gKM2
MC1 --- uFP_pMC1 uFP_gMC1
MC2 --- uFP_pMC2 uFP_gMC2
MC5 --- uFP_pMC5 uFP_gMC5
MM1 --- uFP_pMM1 uFP_gMM1
2345 --- uFP_p2345 uFP_g2345
SL6 --- uFP_pSL6 uFP_gSL6
SU1 --- uFP_pSU1 uFP_gSU1
SU5 --- uFP_pSU5 uFP_gSU5N