Configuration Guide User Manual

Micro-PWC CONFIGURATION GUIDE
198 Grafx Editor
4.4.7.2 FP_DYmeter
The submodel FP_DYmeter (Figure 4-80) displays an analog meter representation of the value of a con-
troller database point.
Position the pointer on the submodel and click the right mouse button, then click on the Configure Sub-
model item on the resulting pull-down menu. The following Submodel Configuration window will appear.
Figure 4-80. Meter Submodel (FP_DYmeter)
Figure 4-81. Meter Submodel Configuration Window