Configuration Guide User Manual

Micro-PWC CONFIGURATION GUIDE
Grafx Editor 197
Variables
TagAtom Enter the Tag.atom of the controller database point (or a constant value) that is to
be displayed (e.g., tcPID.pv).
(User must define variable.)
lower_limit Enter the Tag.atom of the controller database point or the constant value that rep-
resents the lower limit of the dial (e.g., tcPID.ilr).
Default: None
(User must define variable.)
setpoint Enter the Tag.atom of the controller database point (or a constant value) that rep-
resents the setpoint of the dial (e.g., tcPID.csp).
Default: None
units Enter the ASCII string describing the Engineering Units (e.g., DEG C).
Default: eun
upper_limit Enter the Tag.atom of the controller database point or the constant value that rep-
resents the upper limit of the dial (e.g., tcPID.iur).
Default: None
(User must define variable.)