Configuration Guide User Manual

Micro-PWC CONFIGURATION GUIDE
188 Grafx Editor
Variables
TagName Enter the Tag (TagName.tag) of the controller database point that is to be trended
(e.g., tcPID.pv).
(User must define variable.)
num_points Enter the number of samples displayed on the trend.
(User must define variable.)
axis_color Enter the number of the desired axis color. (See any color palette in the Settings
or Properties windows for color numbers.)
Default: 0 (Black)
label_color Enter the number of the desired label color.
Default: 0 (Black)
trace_color Enter the number of the desired trace color.
Default: 7 (White)
x_ticks Enter the number of tickmarks on the X axis
Default: 0
y_ticks Enter the number of tickmarks on the Y axis
Default: 0
lower_limit Enter the Tag.atom of the controller database point or the constant value that rep-
resents the lower limit of the trace (e.g., tcPID.ilr).
Default: None
(User must define variable.)
upper_limit Enter the Tag.atom of the controller database point or the constant value that rep-
resents the upper limit of the trace (e.g., tcPID.iur).
Default: None
(User must define variable.)