Configuration Guide User Manual

Micro-PWC CONFIGURATION GUIDE
156 Grafx Editor
Variables
TagAtom Enter the Tag.atom of the controller database point (or a constant value) that
is used to determine the height of the tank fill (e.g., tcPID.pv).
(User must define variable.)
fill_color Enter the number of the desired fill color of the tank. (See any color palette in
the Settings or Properties windows for color numbers.)
Default: 0 (Black)
lower_limit Enter the Tag.atom of the controller database point or the constant value that
represents the lower limit of the rectangular area (e.g., tcPID.ilr).
Default: None
(User must define variable.)
upper_limit Enter the Tag.atom of the controller database point or the constant value that
represents the upper limit of the rectangular area (e.g., tcPID.iur).
Default: None
(User must define variable.)
low level Enter the Tag.atom of the controller database point or the constant value that
represents the value above which the rounded bottom is filled (e.g., 0).
Default: None
(User must define variable.)