Configuration Guide User Manual

Micro-PWC CONFIGURATION GUIDE
146 Grafx Editor
VARIABLES
TagAtom Enter the Tag.atom of the controller database point (or a constant value) to be
displayed (e.g., tcPID.pv).
Note: User must define variable.
Type Click on the desired format:
• Native - Displays the data in the format configured in the controller
module (based on the FMT atom for floating point values). This format is
always used to display text data.
• Value - Allows for user configurable format. (See the description of the
Decimal places variable.)
Default: Native
Decimal
Places
Click on the slider to select the desired number of digits to the right of the
decimal place. Used only when Value is selected as the Type; otherwise this
item is not displayed.
Default: 2
Color Enter the number of the desired color. (See any color palette in the Settings or
Properties windows for color numbers.)
Default: 7 (White)
Font Enter the number of the desired font. (Available fonts and font numbers can
be viewed using the Font drop-down combo box on the Text tab of the
Settings and Properties windows.)
Default: 7 (Arial Bold)
Size Click on the slider to select the desired size of the displayed data; 4.0 is the
largest size and 1.0 is the smallest.
Default: 2.0
Align Click on the desired alignment as follows:
• Left - The first (leftmost) digit of the dynamic value will be aligned with
the starting location (left border) of the box which defines this submodel
for positioning on the Grafx editor display.
• Center - The dynamic value will be centered on the starting location (left
border) of the box which defines this submodel for positioning on the
Grafx editor display.
• Right - The last (rightmost) digit of the dynamic value will be aligned with
the starting location (left border) of the box which defines this submodel
for positioning on the Grafx editor display.
Default: Left