Configuration Guide User Manual

Micro-PWC CONFIGURATION GUIDE
92 Grafx Editor
4.2.4.9 Creating Arcs
An arc is created using the Arc button . Arcs are portions of a circle and are constructed by picking
the two endpoints of the arc, then picking a point along the edge of the arc.
EXAMPLE:
1. Click on the Arc button.
2. Click on the first endpoint of the arc (a).
3. Click on the second endpoint of the arc (b).
4. Click on a point along the edge of the arc (c). An arc will appear on the screen.
5. Repeat steps 2, 3 and 4 to construct additional arcs if necessary, or terminate the procedure.