Manual

EP1000A E-Port Instruction Manual
Installation 17
9. Clip the unit to the DIN rail.
2.3.2.3 Snap Track Mounting
If a Snap Track mounting bracket was specified when the E-Port Unit was ordered, the following items are
supplied for mounting the unit:
1. Remove the screws from both sides of the E-Port unit.
2. Place the E-Port unit in the mounting bracket (Figure 2-5), taking care to align the holes in the
bracket with the holes in the sides of the unit.
Figure 2-3. E-Port Unit in DIN Rail Mounting
Part Number Description
623B600U01
1 aluminum Snap Track bracket