Manual

EP1000A E-Port Instruction Manual
6 Introduction
1.5 Supported Instruments
All Micro-DCI controllers can be used with the E-Port unit. For best performance:
• 53MC5000 controllers should have Revision 5 firmware (or higher).
• 53 SL6000 controllers should have Revision 15 firmware (or higher).
All Mod30ML and Modcell controllers can be used with the E-Port Unit. At least one Modbus interface is
required.
1.6 Micro-DCI Controller Interface Options
The EP1000A E-Port can connected to MicroMod Micro-DCI controllers in several different ways.
1.6.1 53MC5000 Configuration Port
Figure 1-1. Connecting the E-Port Unit to the 53MC5000 Configuration Port