User Manual

3.3.2 DISPLAYING A DATAPOINT
The following procedure illustrates how to display the contents of datapoint B012, which is the dis-
play brightness index (the normal setting is 4; 0 is the brightest and 7 is the dimmest setting). Fig-
ure 3-9 contains supporting illustrations for the display procedure described in Table 3-2.
Table 3-2. Procedure to Display a Datapoint
Step Press
Once
Shift
Result
Press to
Locate
Target
Char.
Result
1
l
Puts instrument in engineering mode.
2If
DISPLAY
does not appear, press
2
.
3
3
Displays entry line:
POINT .
4BPuts
B
on entry line:
POINT .B
.
5.B
∆
1Shifts
B
and puts
1
on entry line:
POINT .B1
.
6.B1
∆
2Shifts
B1
and puts
2
on entry line:
POINT .B12.
7
3
Enters address to display datapoint contents.
The address with the contents are displayed as
follows:
B12 4.
8 Returns instrument to operator mode.
Notes:
∆
= space. Also,
B12
can be entered for
B012
, as datapoints 99 or less for all of the data
types (e.g., A, B, C, H, and L - see Table 4-1) do not require leading zeros.
Addressing a Datapoint Displaying a Datapoint Contents
Figure 3-9. Displaying a Datapoint
53ML5100 Manual Loading Station
3-8