User guide

Training Manual
Introduction to Micro-Tools
7 - 7
9. Once the preliminary information has been entered, the MicroTools software is Ready to
Install. Click Install when you are ready to proceed.
Figure 7.8.
Micro-Tools Setup
Installing Micro-DCI
Micro-Tools
10. When installing the MicroTools software for the first time, MicroTools will require the
installation of the Micro-DCI Communications Services. MicroTools will first search for the
Communications Services and if not found will initiate the installation of the
Communications Services before installing the MicroTools application.
Figure 7.9.
Micro-Tools Setup
Preparing to Install
Communication
Services