User guide

Training Manual
F-TRAN Programming Lab
10- 29
Figure 10.50.
Display handler
• Type the value 50 and then press the Enter key on your keyboard. The Display
handler will redisplay as shown in the next figure.
Figure 10.51.
Display handler
• Click on the Save button on the Display Handler window and then on the OK
button. The Save button will right the display changes to the controller’s database.
• Press the F2 key on the front of the controller to select the Tank display. The
controller now should display your custom display as shown in the next figure:
Figure 10.52.
F-TRAN Custom
display