User guide

Training Manual
Hardware Familiarization Lab
2 - 2
2. Remove the Front Display Panel: After removing the power, keep the instrument on the
table.
• Insert a small screwdriver into the notch at the top center of the front display panel
as shown in the next figure:
Figure 2 .1
MC5000 - Opening
the instrument
• Twist the screwdriver to release the latch and slide the bezel straightforward.
Figure 2 .1.
MC5000 – Display
panel
• Disconnect the display ribbon cable from its socket at the back of the panel to
remove the front display unit.