Operating instructions

2 Electrical Installation Issue 10/06
MICROMASTER 440
6 Operating Instructions (Compact)
2 Electrical Installation
2.1 Technical Specifications
Input voltage range 1 AC 200 V – 240 V, ± 10 %
(Unfiltered and with built in Class A Filter)
2AB Order No
6SE6440-
2UC
11-
2AA1
12-
5AA1
13-
7AA1
15-
5AA1
17-
5AA1
21-
1BA1
21-
5BA1
22-
2BA1
23-
0CA1
Frame Size A B C
[kW]
0,12 0,25 0,37 0,55 0,75 1,1 1,5 2,2 3,0
Output Rating (CT)
[hp]
0,16 0,33 0,5 0,75 1,0 1,5 2,0 3,0 4,0
Output Power [kVA]
0,4 0,7 1,0 1,3 1,7 2,4 3,2 4,6 6,0
CT Input Current 1)
1,8 3,2 4,6 6,2 8,2 11,0 14,4 20,2 35,5
CT Output Current [A]
0,9 1,7 2,3 3,0 3,9 5,5 7,4 10,4 13,6
Fuse
10 10 10 16 16 20 20 32 40
Recommended
3NA 3803 3803 3803 3805 3805 3807 3807 3812 3817
for UL specified
* * * * * * * * *
[mm
2
] 1,0 1,0 1,0 1,5 1,5 2,5 2,5 4,0 6,0
Input Cable Min.
[AWG] 18 18 18 16 16 14 14 12 10
[mm
2
] 2,5 2,5 2,5 2,5 2,5 6,0 6,0 6,0 10,0
Input Cable Max.
[AWG] 14 14 14 14 14 10 10 10 8
[mm
2
] 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,0 1,5
Output Cable Min.
[AWG] 18 18 18 18 18 18 18 18 16
[mm
2
] 2,5 2,5 2,5 2,5 2,5 6,0 6,0 6,0 10,0
Output Cable Max.
[AWG] 14 14 14 14 14 10 10 10 8
[kg] 1,3 1,3 1,3 1,3 1,3 3,4 3,4 3,4 5,7 Weight
(with built in filter)
[lbs] 2,9 2,9 2,9 2,9 2,9 7,5 7,5 7,5 12,5
[kg] 1,3 1,3 1,3 1,3 1,3 3,3 3,3 3,3 5,5
Weight (unfiltered)
[lbs] 2,9 2,9 2,9 2,9 2,9 7,3 7,3 7,3 12,1
[Nm] 1,1 1,5 2,25 Tightening torques for
power terminals
[lbf.in] (10) (13,3) (20)
1) Secondary conditions: Input current at the rated operating point - applies for the short-circuit voltage of the line
supply V
k
= 2 % referred to the rated drive converter power and a rated line supply voltage
of 240 V without line commutating reactor.
* UL listed fuses such as Class NON from Bussmann are required for use in America