Operation Manual

28 of 74
Malfunction Cause Rectification
The appliance is
not working.
The electrical circuit
has been interrupted.
• Check whether the mains plug
is plugged in.
• Check whether the mains
socket is live by plugging in
another electrical device (e.g. a
bedside lamp).
• Check whether the connection
cable has been damaged.
The temperature is
not low enough.
The door does not
seal properly when
closed or has been
opened too often.
• Arrange the bottles so that
they do not prevent the door
closing properly.
• Open the door for a short peri-
od of time.
• Check the door seal.
The appliance is dirty. • Clean the appliance.
The appliance has
been set up in a loca-
tion that is exposed
to direct sunlight or
next to a heat source.
• Set up the appliance in anoth-
er location.
• Set the appliance to a colder
setting.
The appliance
is operating too
loudly or vibrating.
The feet on the appli-
ance have not been
properly adjusted.
• Adjust the feet on the appli-
ance.
The fan is blocked. • Check the fan.
The LED display
is off.
The power supply
has been interrupted.
• Check the plug.
The control system
has failed.
• Contact the customer service
department.
The operating el-
ements do not
work.
The temperature sen-
sor is defective.
• Contact the customer service
department.
The interior light-
ing is not working.
The LED is defective. • Contact the customer service
department.
15803 MULI eCommerce Content Final.indb 2815803 MULI eCommerce Content Final.indb 28 28.11.2014 09:53:2528.11.2014 09:53:25