Operation Manual

23 of 74

3.3. Setting up the appliance

• Only connect the appliance to a properly installed 220–

240V~50Hz safety socket that is easy to reach and close to

the set-up location. The safety socket must be freely acces-

sible so that you can unplug the appliance from the mains

quickly if necessary.

• Do not use an extension cable.

• Ensure the mains cable is out of harm’s way and will not trip

people up. Do not allow the mains cable to become trapped

or squashed.

• Set up the appliance in a dry and ventilated room. Do not ex-

pose the appliance to direct sunlight because this can dam-

age the surfaces of the appliance and increase energy con-

sumption.

• Do not set up the appliance near to heat sources such as ov-

ens, radiators, underfloor heating, etc.

• Set up the appliance on a stable, flat surface.

• The appliance should be level; compensate for any uneven-

ness in the floor by unscrewing and adjusting the four ex-

tendible feet.

15803 MULI eCommerce Content Final.indb 2315803 MULI eCommerce Content Final.indb 23 28.11.2014 09:53:2428.11.2014 09:53:24