Operation Manual

EG111 39
USB Tethering
You need to insert a data service enabled UIM/SIM card in your phone.
1. Go to → → More → Tethering & portable hotspot.
2. Connect your EG111 to your computer through the USB cable.
3. The USB tethering settings get displayed. Turn on USB tethering.
4. The driver installation window will pop-up on your PC or laptop.
5. Install the driver as instructed.
You can now start using the Internet service via your EG111.
Note: Your mobile operator will charge you based on your GPRS data usage.
Connectivity via Wi-Fi Hotspot
You need to insert a data service enabled SIM/UIM card in your phone to
use your EG111 as a Wi-Fi router.
1. Go to → → More → Tethering & portable hotspot →
Portable Wi-Fi hotspot.
2. Configure your Wi-Fi hotspot by tapping Set up Wi-Fi hotspot after
turning Wi-Fi hotspot on.
Make sure your computer/laptop has Wi-Fi. After connecting to the wireless
network, you can use the GPRS service from your EG111.
In Linux, Windows 7, and Vista OS, the drivers get automatically installed.
However, in case of Windows XP, you need to manually install the drivers. If
you do not have the driver, you can download it from
www.micromaxinfo.com.
Note: Your mobile operator will charge you based on your GPRS data usage.
BT Tethering
You can share your phone’s Internet connection with another BT enabled
PC/laptop via BT tethering.