Operation Manual

EG111 38
Your phone can connect to a variety of networks and devices, including
Internet, Wi-Fi, GPRS, BT, devices, such as headsets. You can also transfer
files to/from your PC through the data cable.
Data connection will work for both UIM card (EVDO) and SIM
card (2G).
CONNECT TO THE INTERNET
To configure Internet:
1. Go to → → More → Mobile networks. Tap CDMA tab to
configure Access Point Name of the CDMA card or tap GSM tab to
configure Access Point Name of the GSM card. Tap Access Point
Names and select the access point name or change the access point
name for your Internet connectivity as provided by the service
provider of your UIM/SIM card.
By default, your network provider sends the access point name
settings via SMS, or it comes with your UIM/SIM card. You may need
to install these settings. After this, you can choose from the listed
access point names. If the access point names are not listed by
default, please contact your network provider for the same.
2. After you have selected or configured the access point name, go to
→ and switch on Mobile data for the desired UIM/SIM to
enable Internet connection.
Connect to Internet via your Phone
You can use your EG111 as a modem and connect your PC or laptop to the
Internet, when required. You can do this via:
 USB Tethering
 Wi-Fi Hotspot
 BT Tethering