Operating Instructions

A114R 40
1. Go to → → More → Tethering & portable hotspot
→ USB tethering.
2. Connect your A114R to your computer through the USB cable.
3. The USB tethering settings get displayed. Turn on USB
tethering.
4. The driver installation window will pop-up on your PC or laptop.
5. Install the driver as instructed.
6. You can now start using the Internet service via your A114R.
Note: Your mobile operator will charge you based on your GPRS data
usage.
Connectivity via Wi-Fi Hotspot
You need to insert a data service enabled SIM card in your phone to use
your A114R as a Wi-Fi router.
1. Go to → → More → Tethering & portable hotspot
→ Portable Wi-Fi hotspot.
2. Configure your Wi-Fi hotspot as instructed.
You can configure your desired Wi-Fi hotspot settings by tapping the Set
up Wi-Fi hotspot.
Make sure your computer/laptop has Wi-Fi. After connecting to the
wireless network, you can use the GPRS service from your A114R.
In Linux, Windows 7, and Vista OS, the drivers get automatically installed.
However, in case of Windows XP, you need to manually install the drivers.
If you do not have the driver, you can download it from
www.micromaxinfo.com.
Note: Your mobile operator will charge you based on your GPRS data
usage.