Quick Start Guide

3
User Interactions and
Responsibilities
(IEEE 1725, Section 9.2)
a) Do not disassemble or open, crush, bend
or deform, puncture or shred.
b) Do not modify or remanufacture, attempt
to insert foreign objects into the
battery, immerse or expose to water or
other liquids, expose to fire, explosion
or other hazard.
c) Only use the battery for the system for
which it is specified.
d) Only use the battery with a charging
system that has been qualified with the
system per CTIA Certification
Requirements for Battery System
Compliance to IEEE 1725. Use of an
unqualified battery or charger may
present a risk of fire, explosion,
leakage, or other hazard.
e) Do not short circuit a battery or allow
metallic conductive objects to contact
battery terminals.
f) Replace the battery only with another
battery that has been qualified with the
system per this standard, IEEE-Std-1725.
Use of an unqualified battery may
present a risk of fire, explosion,
leakage or other hazard.
Only authorized service providers shall
replace battery. (If the battery is non-
user replaceable).
g) Promptly dispose of used batteries in
accordance with local regulations.
h) Battery usage by children should be
supervised.