Use and Care

 www.micromatic.com•1
(
866
)
327-4159 Installation, Use & Maintenance
3
Receiving & Inspecting
Upon receiving your new Micro Matic Pro-Line Wine dispenser, check the package
and the unit for any damages that may have occurred during transportation.
Visually inspect the exterior of the package. If damaged, open and inspect the
contents with the carrier. Any damage should be noted and reported on the
delivering carrier’s receipt.
In the event that the packaging is not damaged, yet upon opening, there is
concealed damage to the equipment notify the carrier immediately. Noti cation
should be made verbally as well as in written form. Request an inspection by the
shipping company of the damaged equipment. Retain all crating material until
inspection has been made. Finally, contact Micro Matic.
Uncrating
1. Cut and remove the outer packaging.
2. Lift the unit o the skid.
3. If the unit has been laid down during this operation leave upright for 24 hours
before plugging into power source.
Pro-Line Wine
MDD23W SeriesMDD58W Series