Operating instructions

TM 11574A-OI

3-45

Figure 3-23. Replacing the Glass Dome.

(2) Replacing Light Bulb

. To replace the interior light bulb follow the steps below:

(a) Remove the two screws (Figure 3-29, Item 1) securing the protective cage (Figure 3-29,

Item 2) to the lighting assembly.

(b) Remove the protective cage and set aside.

(d) Unscrew the defective light bulb and discard.

(e) Screw a new light bulb into the light socket.

(f) Position the glass dome on the lighting fixture, taking care to ensure that it is seated

properly. Be sure to hold the glass dome in position until the protective cage is put in

place.

(g) Position the protective cage set aside earlier over the glass and secure with two screws.