User's Manual

EN
28
3) Insert the Bluetooth receiver into a USB port
of the computer after the installation program
requests to do so.
4) Restart the computer after installation is
completed.
*
Select a single USB port and make sure to always use
the same port in the future.
*
Do not use other Bluetooth receiver.
5) Turn on the Bluetooth function of the WatchBP
Office device on by switching the Bluetooth
switch at the back of the device to the “ON”
position. The Bluetooth icon will illuminate and
flash continuously to show a connection.
*
It is noted that WatchBP office device will not
respond to any button pressing or switching when
the Bluetooth is on. It is to prevent accidental
interruptions during the measurement.
Restart
your
computer
DC 6V 600mADC 6V 600mA