User's Manual

EN
24
Setting inflation pressure
Inflation pressure can be set manually from 140 to
280 mmHg by pressing and holding the Start/Stop
Button for 7 seconds.
Setting measurement intervals
It is concluded that a 15-second interval between
blood pressure readings and these measurements
are started after a 5 minute rest period.
1) Pressing and holding the Start/Stop Button for 3
seconds.
Press and hold
for 7 seconds...
Press and hold
for 3 seconds...
Press the M Button to adjust the pressure and press
Start/Stop again to save the setting.
2) Press the M Button to adjust the measurement
interval, then press the Start/Stop Button to
confirm, the meter will back to stand by Mode.
15
45
30
60