User's Manual

23
Special Function (cont.)
Taking fewer than three measurements
In «FOLLOW-UP» Mode only, the measurement
sequence can be stopped at anytime by pushing
the Start/Stop Button. By pushing the Start/
Stop Button remaining the device enters stand-
by, cancelling remaining measurements in the
sequence. Data from the measurements completed
can be by viewed by pushing the M Button.
Skipping the 60-second countdown
In «1st VISIT» and «FOLLOW-UP» Mode, the
60-second pre-measurement countdown can be
skipped by pushing the Start/Stop Button. Once
the Start/Stop Button is pushed, the device will
immediately begin the next measurement.
*
The device can put into Stand by Mode by pressing
the Start/Stop Button after the completion of
measurements. The device will automatically switch to
Stand by Mode if left unattended for five minutes.
Cancels remaining
measurements at
anytime during
the measurement
sequence.
Skips the 60-second
countdown and begins
measurement.
Stand by mode