User's Manual

AUSCULT 1st FOLLOW UPAUSCULT 1st FOLLOW UP AUSCULT 1st FOLLOW UP

«FOLLOW-UP» Mode

1) Turn on the power – Turn on the device by

switching the I/O switch at the back of the device

to the ON position and make sure Bluetooth

switch is in off position..

3) Switch to «FOLLOW-UP» Mode – Slide the Mode

Switch to «FOLLOW-UP» Mode.

4) Select the inﬂation cuff – Set the device to

inﬂate only the designated (right or left) cuff.

Press and hold the M Button for 3 seconds.

2) Apply the cuff – Properly ﬁt one cuff to the

preferred measurement arm.

Press and hold

for 3 seconds...

Additional visual instruction can be found on the cuff

DC 6V 600mADC 6V 600mA