MICROLIFE CARDIO+ ® Blood Pressure Monitor For accurate blood pressure measurement Instruction Manual
Dear Customer, We thank you for purchasing the Microlife® Cardio+, the blood pressure monitor that allows you to easily and accurately measure your blood pressure. The Microlife Cardio+ Blood Pressure Monitor is a reliable medical device designed for use with your iPhone, iPad, or iPod touch. This simple-to-use, accurate monitor comes highly recommended for blood pressure monitoring at home.
Table of Contents Product Overview The Microlife Cardio+ Blood Pressure Monitor and Application........... 3 What is included................................................................................. 4 Before Using the Microlife Cardio+ for the First Time Charging the Microlife Cardio+ Blood Pressure Monitor..................... 5 Downloading the Microlife Cardio+ App from the App Store................ 5 Creating a User Profile.......................................................................
Product Overview Microlife Cardio+ Blood Pressure Monitor and Application 1) Connection Slot on iPhone/iPad/iPod touch 2) Microlife Cardio+ Dock 3) On/Off Button Cancel Button (during measurement) 2 4) Microlife Cardio+ Plug 5) Preformed Cuff 6) Air Hose 7) Micro USB Port 8) Air Hose Socket 1 3 3 4 5 6 7 8
What is included: 9) Measurement • Microlife Cardio+ Dock x 1 10) Report • Preformed Cuff, Size M–L (22–42 cm) x 1 11) Settings • USB Cable for Charging Battery x 1 12) Users • Carrying Case x 1 • Instruction Manual x 1 • Quick Start Guide x 1 Read the instructions carefully before using this device. 9 10 11 12 Type BF applied part.
Before Using the Microlife Cardio+ for the First Time Charging the Microlife Cardio+ Blood Pressure Monitor • Connect the dock to an iOS-device USB power adapter using the supplied USB cable. Connect to a power outlet and charge the dock for 2 hours. • During the charging process, the « » button lights up in yellow. When the battery is completely charged, the « » button lights up briefly in blue, and then the unit automatically switches off.
Setting a Blood Pressure Target (optional) If targeted measurement values have been recommended by a doctor, set a blood pressure target to give a realistic reading based on these recommendations. Open , and go to «Settings». Set and save the «Systolic» and «Diastolic» targets. After completing these steps, you are ready to take a blood pressure measurement. Note: Confirm that the time and date on your iOS device are correct.
Taking a Measurement • Open the «Microlife Cardio+» app automatically by plugging the iOS device to the monitor dock. Alternatively, click on the app displayed on the iOS device screen. • Select the measurement mode: ONE measurement (single), or MAM measurement (triple). • Press «Start» to begin. • Press «Stop» to cancel anytime during the measurement (e.g., if you feel uncomfortable because of the pressure from cuff).
Completed Measurement • After the results are shown, the measurement is complete. • Your systolic and diastolic blood pressure and your pulse are displayed in the results. • Remove the cuff and save the measurement results. Interpreting the Measurement Results WHO Indicator The color of the «WHO» icon indicates the results of your measurement. To check the evaluation of the measurement, press the «WHO» icon. The higher value is used in this evaluation, even if the other value is normal.
Classification of Adult’s Blood Pressure Values in Accordance with the World Health Organization (WHO) in 2003.
Managing the Measurement Data Saving Data • Press «Save» to store the measurement results, including measurement mode, date, and time. If you do not wish to keep a measurement, press «Cancel». • To store measurement results from other blood pressure devices, go to «Manual Input». ☞ The amount of data saved depends on the memory capacity of your iOS device. A warning message will appear when the memory is full. Delete old data to save new data.
Managing a User Profile Appendix Creating a User Profile Battery Power Indicators Creating a profile for an individual user ensures that each individual's data is stored separately. Go to «User» and choose «+» to create a new user. Up to 10 profiles can be created. Selecting a User Profile Go to «User», select the user listed, and proceed to take a measurement. Deleting a User Profile Go to «User», click «Edit», and select the user to be deleted.
Error Messages «ERR 5» Abnormal result The measuring signals are inaccurate and no result, therefore, can be displayed. Read through the checklist for performing reliable measurements and then repeat the measurement.* «ERR 6» MAM mode error There were errors during the measurement in MAM mode, making it impossible to obtain a final result. Read through the checklist for performing reliable measurements and then repeat the measurement.
Facts about Blood Pressure and SelfMeasurement • Blood pressure is the pressure of the blood flowing in the arteries, generated by the pumping of the heart. • Two values, the systolic (upper) value and the diastolic (lower) value, are always measured. This device also indicates pulse rate (the number of times the heart beats in a minute). • Permanently high blood pressure can damage your health and must be treated by your doctor.
• Do not use the device if you think it is damaged or if you notice anything unusual about it. • Never open the device. • Use only the cuff provided. Ensure that children do not use the device unsupervised; some parts are small enough to be swallowed. Device care Clean the device with a soft, dry cloth. Do not use gas, thinners or similar solvents. Cleaning the Cuff Spots on the cuff can be removed carefully with a damp cloth and soapsuds.
Technical Specifications Product name: Microlife® Cardio+ Blood Pressure Monitor BP4GAPO-2M Measurement range: 30 - 280 mmHg: blood pressure 40 - 200 beats per minute: pulse Runs on Apple iOS devices: iPod touch (4th generation), iPod touch (3rd generation), iPhone 4S, iPhone 4, iPhone 3GS, iPad (3rd generation), iPad 2, iPad. Cuff pressure display range: 0 - 299 mmHg Operating system: Apple iOS 5.
Guidance and manufacturer's declaration - electromagnetic emissions The BP4GAPO-2M is intended for use in the electromagnetic environment specified below. The customer or the user of the BP4GAPO-2M should assure that it is used in such an environment. Emission test Compliance Electromagnetic environment-guidance RF emissions CISPR 11 Group 1 The BP4GAPO-2M uses RF energy only for its internal function.
Guidance and manufacturer's declaration - electromagnetic immunity The BP4GAPO-2M is intended for use in the electromagnetic environment specified below. The customer or the user of the BP4GAPO-2M should assure that it is used in such an environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment-guidance Electrostatic discharge (ESD) + 6 kV contact + 8 kV air + 6 kV contact + 8 kV air Floors should be wood, concrete or ceramic tile.
Guidance and manufacturer's declaration - electromagnetic immunity The BP4GAPO-2M is intended for use in the electromagnetic environment specified below. The customer or the user of the BP4GAPO-2M should assure that it is used in such an environment.
Recommended separation distance between portable and mobile RF communication equipment and the BP4GAPO-2M The BP4GAPO-2M is intended for use in a electromagnetic environment in which radiated RF disturbance are controlled.
Guarantee Card Name of Purchaser Serial Number
Date of Purchase Specialist Dealer
Europe / Middle-East / Africa Asia North / Central / South America Microlife AG Espenstrasse 139 9443 Widnau / Switzerland Tel. +41 / 71 727 70 30 Fax +41 / 71 727 70 39 Email admin@microlife.ch www.microlife.com Microlife Corporation 9F, 431, RuiGang Road, NeiHu Taipei, 11492, Taiwan, R.O.C. Tel. 886 2 8797-1288 Fax.886 2 8797-1283 Email service@microlife.com.tw www.microlife.com Microlife USA, Inc. 1617 Gulf to Bay Blvd., 2nd Floor Ste A Clearwater, FL 33755 / USA Tel.
