Instruction Manual

WatchBP Ofﬁce

4 Set the Atrial fibrillation (AFIB) detector

– Press the o r button to switch

the AFIB detector ON or O F F. Pre s s

button to confirm.

Set the AFIB detector option appears only for the device

version with AFIB detector. If the device has an activated AFIB

detector then it is witched on in default.

5 Set the Central blood pressure (CBP)

measurement – Press o r button

to switch ON or OFF CBP measurement.

Press button to confirm. If the

device is upgraded with CBP then it is

switched on in default.

6 Set the Hide function – The device

features a Hide function in order to prevent

influence on blood pressure in patients

due to nervousness triggered by visible

blood pressure measurements. Press

or button to switch ON or OFF the Hide

Function.

7 Average calculation – The device features

allow you to discard 1st measurement from

averaging while the selected number of

measurement is 3, 4, 5, or 6 measurements.

Press or button to switch ON or

OFF and press button to confirm the

setting of Discarding 1

measurement

(d-1) feature and finish the setting of AUTO

mode . Once you go through the settings,

the device returns to standby.

The last settings programmed to the device are the default of AUTO mode until you set the program again.