Instruction Manual

EN
17
WatchBP Office
Installing the Software Program
The latest WatchBP Analyzer Software is available from the Microlife website.
https://www.microlife.com/support/software-professional-products
Double click the download installer and simply follow the instructions provided in the
installation window on the computer screen.
Bluetooth connectivity
Pairing the device
Press and hold the button for around 7
seconds, untill the Bluetooth icon flashes and
starts pairing mode. The unique 6-digit device
ID of the unit is displayed. Connect the device
and confirm pairing. The Bluetooth icon is
displayed on the LCD screen of the device to
show the presence of Bluetooth connection.

Press and hold the button for 5 seconds to clear the
connection.
MODE
Rechargeable battery and power adapter
Rechargeable Battery
The device has a built-in, rechargeable Ni-
MH battery pack that can perform up to 400
measurement cycles on a full charge. The battery
can be recharged with the power adapter provided
with the device. The empty battery indicator is
displayed when the battery is low.
• When using the device for the rst time, charge
the battery until the recharge indicator turns to
green.
• The orange recharge indicator indicates that the
recharge is in progress.
• A green recharge indicator indicates that the
recharge is completed.
• A green and orange changing recharge indicator,
means that there is a charging error. Make sure
that the correct Mains Adapter is used. If the
condition persists, contact Microlife or the local
distributor.