Instruction Manual

10
1 Set the Number of Measurements –
Press the button when the device is in
AUTO mode to first enter setting of Number
of Measurements. Use the button
to scroll up and use button to scroll
down among one to six measurements.
Press button to confirm the number
of measurements and enter Resting Time
setting.
Taking measurements in MANUAL and AUTO
Mode
Turn on the power
Turn on the device by pressing the button
of the device.
Connect the cuff to the device
Connect the cuff to the device by inserting the
cuff connector into the cuff connector socket.
Select an operation mode
There are two measurement modes that can
be used.
Press the button to switch between
AUTO or MANUAL Mode.
Settings of AUTO Mode
The measurement program in AUTO Mode of the device can be set, includes Number of
Measurements, Resting Time (Countdown time), Interval Time, AFIB detector,
CBP measurement, HIDE and Average calculation (Discard 1st measurement).
2 Set the Resting Time – Press the
button to scroll up and use button to
scroll down among 15, 30, 60, 120, 180,
240, 300 seconds of Resting Time. P r e s s
button to confirm and enter Interval
Time setting.
3 Set the Interval Time – between
measurements - Press the button
to scroll up and use button to scroll
down among 15, 30, 60, 120, 180, 240,
300 seconds of Interval Time. Press
button to confirm and enter AFIB detector
setting.