Instruction Manual

WatchBP Ofﬁce

Installing the Software Program

The latest WatchBP Analyzer Software is available from the Microlife website.

https://www.microlife.com/support/software-professional-products

Double click the download installer and simply follow the instructions provided in the

installation window on the computer screen.

Bluetooth connectivity

Pairing the device

Press and hold the button for around 7

seconds, untill the Bluetooth icon flashes and

starts pairing mode. The unique 6-digit device

ID of the unit is displayed. Connect the device

and confirm pairing. The Bluetooth icon is

displayed on the LCD screen of the device to

show the presence of Bluetooth connection.

Please note the following:

Bluetooth is not active when the blood

pressure monitor device is recording data. The

blood pressure monitor device will not sound

any alarm with or without Bluetooth. The

Bluetooth is used only to transfer data from

point A to point B.

Bluetooth connection of the WatchBP Analyzer supports Microsoft Windows 10

Regarding the connectivity architecture design, we used proprietary communication

protocol to do data transfer process. The specific communication protocol is assured

that the information (data) is correct. The program checks ACK firstly. Afterward, the

program compares the received checksum with the sum of encoded raw data. If the

result is correct, the data is guaranteed during transmission. In contrast, once the

device gets wrong communication command, it will not have any response.

It is a data encryption and decryption architecture. We used proprietary encryption

method to pack blood pressure raw data. In other word, Blood Pressure Analyzer

need to use proprietary decryption method to unpack the encrypted data to get blood

pressure raw data.

Press and hold the button for 5 seconds to clear the

connection.

See the instruction manual of WatchBP Analyzer for details

The memory data can be transferred to your PC (personal computer) running the WatchBP

Analyzer Software by connecting the monitor via USB cable or Bluetooth.

System Requirements for Software:

1GHz CPU. 512MB Memory, 4.5GB free hard

disk space, Microsoft Windows 7 SP1 / 8 / 10