Instruction Manual

12
Set Highest Inflation Pressure – press
button when the device is in MANUAL mode to
enter setting of Highest Cuff Pressure. U s e
button or button to scroll among 160,
180, 200, 220, 240 mmHg and auto ‘- - -‘. Use
the button to confirm and move to HIDE
Pressure setting.
If CBP measurement is enabled, the cu pressure is held at
around 60 mmHg for around 10 seconds to collect sucient
pulse waves.
*
Press button during countdown to skip the countdown.
*
Press button to cancel remaining measurements at anytime during the measurement sequence. Display the results
(average) if available.
*
Taking measurement in AUTO Mode
Select AUTO mode. Press the button to perform automatic measurements based on
the settings of AUTO mode. The device shows all the settings and then starts counting
down the Resting Time before the first measurement. The average measurement
reading is displayed and saved after the measurements are complete.
Viewing stored values
The device stores blood pressure values of the last measurement procedure in AUTO mode.
Press the button to reveal the average of the measurements of AUTO mode. Continue
pressing the button to review individual measurements.
MANUAL Mode Settings
The measurement program in MANUAL mode can be set to preferences. The program
includes setting the Highest Cuff Pressure and Hide Cuff Pressure during deflation.
The device switches the display for the average
Systolic Blood Pressure (SYS), Diastolic Blood
Pressure, Mean Arterial Pressure (MAP),
central Systolic Blood Pressure (cSYS), central
Diastolic Blood Pressure, and central Pulse
Pressure (cPP) automatically if central
blood pressure measurement is enabled.
When auto ‘ - - - ‘ is selected, the device automatically inates
the cu to the correct cu pressure.
*
The device switches the display for values of the individual measurement (including SYS, DIA, MAP, cSYS, cDIA and cPP
values) if central blood pressure measurement is enabled.
*
The Highest Ination Pressure is considered as a safeguard
pressure. The device automatically inates the cu to the
optimal cu pressure but not higher than the selected Highest
Cu Pressure.
*