Users Manual

3
to avoid battery damage and potential damage to the monitor. Microlife USA does
not recommend using rechargeable batteries.
• To avoid inaccurate measurements and to lessen any discomfort from Cuff pressure,
ensure the Cuff is placed correctly on the limb and fits correctly when snug (not
tight), as indicated by markings with the Cuff.
• Consult your physician in cases of frequent irregular heartbeat detections.
• This Risk Indicator feature is provided in order to help you understand your potential blood
pressure risk. However, this feature is neither a diagnosis nor a substitute for a medical
examination. It is important to consult with your physician to determine your risk.
DO NOT:
Drop this device or expose it to strong vibrations; sensitive components may be
affected resulting in inaccuracies and/or operational issues.
Use the Blood Pressure Monitor outside of its specified operation temperature and
humidity rating, or if stored outside of its specified storage temperature and humidi-
ty rating. Avoid storage in direct sunlight.
Use this device in a moving vehicle; inaccurate measurements may result.
Use third party accessories. Only use Microlife authorized accessories, such as cuffs
or AC adapters, as those not approved for use with the device may provide inaccu-
rate measurements, injury, and/or damage the device.
STANDARDS:
This medical device is compliant with:
• Medical device and non-invasive blood pressure monitor standards IEC 60601-1, IEC
60601-1-2, IEC 60601-1-11, and AAMI/ANSI/IEC 80601-2-30, and
• Electromagnetic standards IEC 60601—1-2 along with FCC Part 15, and
• Clinical Testing per standard ISO 81060-2:2013 was conducted on blood pressure
device using the same measurement technology.
Please note: According to international standards, your monitor should be checked for
accuracy every 2 years.
MV1-3B-HM IB-FINAL-042120-rev1-051320.qxp_MLU3AC1-JAN05-2 5/13/20 2:22 PM Page 3