Users Manual

4.3. Using the AC power adapter

You may also operate this monitor using the included AC adapter.

Use only the included AC adapter to avoid damaging the unit.

a) Ensure that the AC adapter and cable are not damaged.

Plug the adapter cable into the AC adapter port on the right

side of monitor.

c) Plug the AC adapter into a 110 V power socket (U.S. or

Canada).

d) Test that power is available by pressing the ON/OFF button.

Note:

• No power is taken from the batteries while the AC adapter is

connected to the monitor.

• If the power is interrupted during a measurement (e.g., by

removal of the adapter from the wall socket), the instrument

must be reset by removing the plug from the instrument.

If you have any questions regarding the AC adapter, call

Blood Pressure Support at 1-866-241-6217.

4.4. Tube connection

Insert the cuff tube into the opening on the left side of the monitor.

4.5. Select the user

This blood pressure monitor is designed to store 120 meas-

urements for each of two users.

Before taking a measurement, be certain that the cor-

rect user has been selected.

a) Press the "TIME/DATE" button to toggle between user 1

and user 2.

b) Press the ON/OFF button to confirm your selection.

MV1-3B-HM IB-FINAL-042120-rev1-051320.qxp_MLU3AC1-JAN05-2 5/13/20 2:22 PM Page 15