Users Manual

4.2. Setting the date and time

1. After the new batteries are activated, the year number flashes

in the display. You can advance the year by pressing the "M"

utton. To confirm and then set the month, press the time button.

2. You can now set the month using the "M" button. To confirm

and then set the day, press the time button.

3. Please follow the instructions above to set the day, hour and

minutes.

4. Once you have set the last minute and pressed the time but-

ton, the date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the

time button down for approximately 3 seconds until the year

number starts to flash. Now you can enter the new values as

described above.

TIME PM

- Button

Time/Date

Button

MV1-3B-HM IB-FINAL-042120-rev1-051320.qxp_MLU3AC1-JAN05-2 5/13/20 2:22 PM Page 14