Product Info

This function allows you to view the three individual measurements used to calculate the ADC
Averaging Mode Technology measurement. After taking an averaging mode measurement turn
unit off, hold the «MEMORY» button for three seconds. (Do not hold the button longer than
seven seconds or you will delete all the readings in the memory!) Let go of the button and watch
the screen. It will automatically scroll through the three measurements used in the measurement.
Keep pressing the Memory button to scroll through the last three measurement used in the
measurement.
Reading Measurement Results
When the measurement has been concluded, cuff will automatically deflate. The measured
systolic and diastolic blood pressure values, as well as the pulse are now displayed.
The appearance of this symbol xxxxxx signifies that an irregular heartbeat was detected. This
indicator is only a caution.
NOTE: We recommend contacting your physician if you see this indicator frequently. See
Section x (page x(irregular heartbeat) for more information.
To prolong battery life, the device switches off automatically if no button is pressed for one
minute. Otherwise you can switch it off by pressing the «ON/OFF» button.
IRREGULAR HEARTBEAT DETECTOR
This function indicates an allorhythmic heartbeat. If the IHD symbol appears on the display that
means that certain abnormalities in heartbeat frequency were detected during the measurement.
In this case, the result may deviate from your normal blood pressure – repeat the measurement.
In most cases, this is no cause for concern. However, if the symbol iconxxxxx appears on a
regular basis (e.g., several times a week with measurements taken daily) we advise you to tell
your doctor.
Information for the doctor on frequent appearance of the Irregular Heartbeat Detector
This device is an oscillometric blood pressure monitor that also analyses pulse irregularity
during measurement. The device is clinically tested. The arrhythmia symbol is displayed after
the measurement. If the symbol appears more frequently (e.g., several times per week on
measurements performed daily) we recommend the patient to seek medical advice. This device
does not replace a cardiac examination, but serves to detect pulse irregularities at an early
stage.
Traffic Light Indicator
The bars on the left hand edge of the display show the range within which the indicated blood
pressure values lie. Depending on the height of the bar, the readout value is either within the
normal (green), borderline (yellow), (orange), or danger (red) range. The classification is based
on standards adopted from the WHO (World Health Organization). Refer to the chart to the right
for details of the classification. Use chart page 23 on 6023N.
MEMORY FUNCTION
Recall and Storage of Measurements
At the end of a measurement, this monitor automatically stores each result with date and time.
This unit stores 99 memories for each of two users.
Viewing the Stored Values