Product Info

SETTING UP YOUR BLOOD PRESSURE MONITOR
Inserting the Batteries
After you have unpacked your device, insert the batteries. The battery compartment is located
on the underside of the device (see illustration).
1. Remove cover as illustrated.
2. Insert the batteries (4 x AAA, 1.5V), observing the indicated polarity.
Attention!
If a battery warning (show picture) appears in the display, the batteries are almost
discharged and must be replaced.
After battery warning (show picture) appears, the device will not work until batteries have
been replaced.
If the blood pressure monitor is not used for long periods, remove the batteries from the
device.
Use AA Long-Life or Alkaline 1.5V batteries. Do not use rechargeable batteries.
Functional check: Press the «MEMORY» button down to test all the display elements.
When functioning correctly many icons will appear.
Using the AC Power Adapter (model 6025N) (have picture with device and adapter?)
It is possible to operate the Advantage Automatic Blood Pressure Monitor model 6025N with an
AC adapter.
1. Push the plug into the port on the right side of the device.
2. Plug the AC adapter into a 120V power socket. The device is ready for measurement.
3. Test that power is available by pressing the «ON/OFF» button.
NOTE:
Use only the AC adapter provided with your device. ADC is not responsible for the
warranty servicing/repair of the monitor if any other adapter is used.
No power is taken from the batteries while the AC adapter is connected to the device.
Consult ADC if you have any questions relating to the AC adapter.
AC adapter is NOT available for model 6024N
Cuff Connection
Insert the cuff tube into the opening provided on the left side of the device as shown in the
picture.
Setting the Time and Date
This blood pressure monitor incorporates an integrated clock with date display. The device will
also store the date and time of each measurement in its memory. After new batteries have been
inserted, the device will request the date and time to be reset
1. To set the date, begin with the year. The four digits (2021) on the screen will blink. You
can change the year by pressing the «MEMORY» button. To confirm and set the year,
press the «SET» button.
2. The device will automatically advance to the month. To change the month, use the
«MEMORY» button. To confirm and set the month, press the «SET» button.
3. To set the day, hour, and minutes, use the same steps. Push the «MEMORY» button to
change the display value. Press the «SET» button to confirm and set the value.
4. Once you have set the minutes and pressed the «SET» button, the date and time are set
and the time is displayed.
NOTE