Product Info
Working with devices
Pair a blood pressure device (first-time login)
You can pair a blood pressure device as part of your first-time login. After touching I
have a blood pressure device in the Add a device screen, complete the following
steps:
1. Unpack your device and install the batteries. Make sure the device is powered off.
2. Press AND HOLD the power button on the blood pressure monitor for 2 seconds to
pair the device.
The Found device screen appears on your phone.
3. Rename the device or leave as is, and then touch Save.
10 Using the ADC@home connect app ADC
®
Home™ App
The Add a device screen appears.
4. Touch Done adding devices.
The All set! message appears. Touch Start now! to begin using the app.
Note Pairing the monitor to the app syncs the monitor time to your
phone time. Readings from the monitor previous to pairing or
syncing may have an incorrect time stamp.
Working with readings
Take a reading on a paired blood pressure device
1. Review the instructions for taking a blood pressure reading in the ADC@home connect
Blood Pressure Monitor directions for use.
2. Log in to ADC@home connect as you normally do.
Directions for use Using the ADC@home connect app 13
Note The app must be open to successfully capture readings from the monitor.
The Home screen appears.
3. Place the blood pressure cuff on your arm and sit comfortably for 5 minutes.
4. Press the power button on the monitor to begin the blood pressure measurement.
The blood pressure and pulse rate appear on the blood pressure monitor screen. In a
moment, the readings appear on the Home screen of your app along with a
notification of a new reading. You have successfully taken your blood pressure and
recorded it in your app.
Irregular heartbeat detector
An irregular heartbeat (IHB) is detected when a heartbeat rhythm varies while the unit is measuring the
systolic and diastolic blood pressure. During each measurement, the monitor records the heartbeat
intervals and calculates the average. If any average is larger than or equal to 25, the irregular heartbeat
symbol appears on the display when the measurement results appear.
CAUTION: The appearance of the IHB icon indicates that a pulse irregularity consistent with an irregular
heartbeat was detected during measurement. Usually this is NOT a cause for concern. However, if the
symbol appears often, we recommend you seek medical advice. The device does not replace a cardiac
examination but detects pulse irregularities at an early stage.