Instruction Manual
Table Of Contents
- Important Product and Safety Information Follow Instructions for Use. This document provides important product operation and safety information regarding
- This blood pressure monitor IS intended to be used:
- This blood pressure monitor IS NOT intended for use with:
- WARNING – Potentially hazardous situation that if not avoided may result in serious injury or death.
- DO NOT:
- CAUTION – Potentially hazardous situation that if not avoided may result in minor/moderate injury, property damage, and/or damage to the device
- DO NOT: (1)
- STANDARDS
- TYPE
- Expected Life
- Trademark Usage:
- Federal Communications Commission (FCC) Statement
- Premium Automatic Blood Pressure Monitor
- 1. Introduction
- 2. Components of your blood pressure monitor
- 3. How do I get started?
- 4. How do I take a measurement?
- 5. Bluetooth functions and application (App)
- 6. Error messages/troubleshooting 7. How is blood pressure measured?
- 8. Care and maintenance 9. Limited warranty 10. Technical specifications 11. How to contact us
- 1.2. Diabetes validation
- 2. Components of your blood pressure monitor (1)
- 2.2. Wide Range Cuff:
- Anti-Slip Cuff:
- Cuff Sizing:
- Note:
- 3. How do I get started? (1)
- 3.2. Inserting the batteries
- Attention!
- 3.3. Power switch / screen lock
- 3.4. Using the interactive touch screen
- 3.5. Setting the date and time
- 3.6. Select the user
- Before taking a measurement, be certain that the correct user has been selected.
- 3.7. Select measuring mode: standard or Microlife Averaging Mode (MAM)
- 3.8. Microlife Averaging Mode (MAM)
- 3.9. Connecting the cuff and monitor
- 3.10. Using the AC power adapter
- Note: (1)
- 4. How do I take a measurement? Please note: You should always be seated before and during measurement.
- 4.2. Common errors
- 4.3. Using the cuff
- Comment
- 4.4. Taking a measurement
- 4.5. Memory: Reviewing readings
- Viewing the stored values
- Memory full
- Clear all values
- 4.6. Stopping a measurement
- 4.7. Hypertension risk indicator
- 4.8. Irregular heartbeat detector
- Information on frequent appearance of the irregular heartbeat symbol
- 4.9. Battery change indicator
- Note: (2)
- 5. Bluetooth functions and application (App)
- Compatibility:
- Questions?
- 5.1. Bluetooth® icon indicator (on monitor)
- Troubleshooting: Bluetooth® connection:
- 5.2. iOS devices:
- Connecting the devices for the first time:
- Setting up your blood pressure monitor:
- Automatic measurement transfer (iOS):
- Manual measurement transfer (iOS):
- Saving readings stored on your monitor (iOS):
- 5.3 Android OS Phones
- Saving readings to your Android phone:
- 6. Error messages/troubleshooting
- Error No. Possible cause(s)/Solutions
- *If this or any other problem occurs repeatedly, please consult your doctor.
- Malfunction Remedy
- Please note: Blood pressure fluctuates continually so succes- sive measurements will show some variability.
- Please note: Individuals visiting their doctor frequently experi- ence anxiety which can result in a higher reading than at home under resting conditions.
- 7. How is blood pressure measured?
- 7.2. Measurement Guidelines
- Additional information
- 7.3. What can I do to change my blood pressure?
- 1) Eating habits
- 2) Previous illnesses
- 3) Habits
- 4) Physical constitution
- 8. Care and maintenance
- 10. Technical specifications:
- 11. How to contact us
19
4.4.
Taking a measurement
After the cuff has been appropriately positioned the
measurement can begin. Remain still during your
measurement, do not flex muscles.
a)
Remain seated quietly for 5 minutes before you
begin the measurement.
b)
Press the START/STOP button. After the system
check, the monitor displays OK and the pump
begins to inflate the cuff. On the display, the
increasing cuff pressure is continually shown.
c)
After automatically reaching an individual
pressure, the pump stops and the pressure will
release. The cuff pressure is displayed during the
measurement.
d)
When the device has detected your pulse, the
heart symbol in the display begins to blink.
e)
When the measurement has been concluded, the
air will automatically release from the cuff. The
measured systolic and diastolic blood pressure
values, as well as the pulse, are now displayed.
f)
The measurement results are displayed until you
switch the device off. If no button is pressed for 1
minute, the device switches off automatically.
g)
When the unit is set to the MAM (Microlife
Averaging Mode) setting, 3 separate measure-
ments will take place in succession, after which
your result is calculated and displayed as a single,
averaged measurement (individual results are not
displayed). There is a 15 second resting time
between each measurement. A count-down
indicates the remaining time between measurements.
If one of the measurements causes an error
message, it will be repeated one more time. If any
additional error occurs, the measurement will be
discontinued and error code displayed.
Pumping
Pressure
Measuring
Systolic
Diastolic
Pulse
Measurement
Complete