User manual

GPX Pro 24
© 2009 XT Racing
Roll-on stop speed
Acceleration sensitivity - adjusts how sensitive start detection is
Low
Medium
Normal
High
Data acquisition setup and parameters
For detailed information, see the section Data Acquisition (DAQ)
Tachometer options – controls how the tach lights and tach bar during races will be utilized
Tach style – how the 8 LEDS will be utilized
Off – lights will not be used for anything
1 LED at a time – only one LED lights up at a time
All LEDs – more LEDs light up at increasing RPMs (consumes more battery power!)
Thumbs up/down – lights are not used for RPM. In Circuit racing, if you do a faster
lap than the previous, the green lights will blink; if a slower lap, the red lights will
blink.
Tach brightness – a setting from 1-10 of increasing brightness of the tach lights
Tach RPM Green – the minimum RPM that the green LEDs come on
Tach Yellow – the RPM at which the yellow LEDs start coming on
Tach Red – The RPM at which the red LEDS start coming on
Tach RPM white (shift light) – the “redline”
Shift light style - what happens when you exceed the "redline"
White LEDs blink
White LEDs solid
All LEDs blink
Tach Display Minimum RPM – this is the minimum RPM on the Tach that displays on the