User manual

GPX Pro Manual9
© 2009 XT Racing
Change start/finish
(select a track) - allows you to move the start/finish line
Maintain splits
(select a track)
Add split – adds a new split for this track. There is a limit of 5 splits.
Remove a split – removes the selected split (a little box indicates which
split will be removed when you press Select)
Remove all splits – deletes all the splits
Rename a track – change the name of an existing track
Data acquisition setup and parameters
For detailed information, see the section Data Acquisition (DAQ)
Tachometer options – controls how the tach lights and tach bar during races will be utilized
Tach style – how the 8 LEDS will be utilized
Off – lights will not be used for anything
1 LED at a time – only one LED lights up at a time
All LEDs – more LEDs light up at increasing RPMs (consumes more battery power!)
Thumbs up/down – lights are not used for RPM. In Circuit racing, if you do a faster
lap than the previous, the green lights will blink; if a slower lap, the red lights will
blink.
Tach brightness – a setting from 1-10 of increasing brightness of the tach lights
Tach RPM Green – the RPM that the green LEDs come on
Tach RPM Yellow – the RPM at which the yellow LEDs start coming on
Tach RPM Red – The RPM at which the red LEDS start coming on
Tach RPM white (shift light) – the “redline”
Shift light style - what happens when you exceed the "redline"
White LEDs blink